OFR 15/30, OFRS 15,25,60, H, M, S series Rated flow: up to OFRS-60 227L/min (60 USgpm) Fluid compatibility: Compatible with most petroleum oil, water glycol, oil-in-water and water-in-oil fluids Temperature range: -40°C to + 107°C ( -40°F to + 225°F ) Pressure rating: Operating 40 bar (600 psi) for OFR series,
IFPM purification system The IFPM is a purification system for hydraulic and lubrication oil. It is an off-line cleaning system for water and solid contamination. Fully automatic operation A water content less than 100 ppm is possible Integrated heater with a heating power of 3 kW Continuous measurement during operation of
Offline Systems Provide flexibility for removing contaminants from hydraulic fluid Guardian hand-held purification system with 4 GPM (15 LPM) flow Choice of five portable purification systems in 3, 10, 20, 30 and 45 GPM flow rates Choice of two filter carts: - 5 GPM flow (500 SUS max.) and ¹/2 HP
UFM 051 UFM 051 mobile filtration units suitable for filling and refilling of filtered hydraulic fluids and lubrication tanks. Flow rate 50 l/min. Pressure max. 10 bar. Electrical motor: single and 3 phase. Use 3 phase if continued used is required Suitable with IN LINE CONTAMINATION MONITOR.
UFM 040 UFM 040 mobile filtration units suitable for filling and refilling of filtered hydraulic fluids and lubrication tanks. Flow rate 33 l/min. Pressure max. 5 bar. Electrical motor: single and 3 phase.
ICM The ICM automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and costs are limited.
500 ml BOTTLE SAMPLER Accessories to be used together with LPA2 and CML2 counters for the statistical analysis of oils available for 500 ml containers.
VPAF Mobile unit for the measurement and optical display of contamination in oils on 47 mm membranes. The unit contains equipment for the static and dynamic sampling of oils in hydraulic systems and tanks.
ACMU - Auxiliary Contamination Monitoring Unit Wind/Tidal/Wave Energy Gearbox applications Gearbox monitoring Offshore & ship systems Lubrication & Oil systems
MPFiltri CML 2 The CML2 contamination Analyser is designed to measure and quantify the number of solid contaminants in Hydraulic, Lubrication and Transmission applications. The CML2 is a portable, accurate instrument suitable for “on-site” applications utilising mineral oil as the operating fluid.
